mirror of
https://github.com/EyeTrackVR/EyeTrackVR-Docs.git
synced 2025-09-26 23:09:15 +08:00
Update Valve_Index.md
This commit is contained in:
parent
83e366b042
commit
3a0097a405
@ -52,9 +52,8 @@ You will need to print:
|
||||
### Assembly Details:
|
||||
#### 1. Heat Inserts
|
||||
1. Start with inserting your heat inserts to the designated holes on the frunk. Place the heat inserts so the side with the smaller radius sits in the hole
|
||||
|
||||
- When heating up the inserts, **let the weight of the soldering iron do the work**, they make take a few seconds to start moving on their own.
|
||||
- **Do not push down**, and remove the iron when they are level with the print. It doesn't need to be perfect, so take your time!
|
||||
- When heating up the inserts, **let the weight of the soldering iron do the work**, they make take a few seconds to start moving on their own.
|
||||
- **Do not push down**, and remove the iron when they are level with the print. It doesn't need to be perfect, so take your time!
|
||||
|
||||

|
||||
|
||||
@ -87,9 +86,9 @@ We can move onto screwing in the XIAO Mount and Facial tracker bridge onto the f
|
||||
|
||||
Two last things to screw in will be the beer hinge and vive facial tracker or babble case if you have it
|
||||
|
||||
1. Place the smaller hole of the beer hinge inbetween the bridge's screw holes.
|
||||
Make sure the beer hinge isn't flipped, it should have the larger hole on the same side of the bridge's heat insert
|
||||
- Screw in **opposite** of where the heat insert is. You should be screwing ***into*** the heat insert
|
||||
1. Place the smaller hole of the beer hinge inbetween the bridge's screw holes.
|
||||
- Screwing in **opposite** of where the heat insert is. You should be screwing ***into*** the heat insert
|
||||
|
||||
|
||||

|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user