docs: fix up parts list

This commit is contained in:
Prohurtz 2023-02-17 16:52:05 -06:00
parent 2d0642f815
commit 5421629d6e

View File

@ -19,7 +19,7 @@ import PartsList from '../../vue/parts_list/PartsList.vue'
<Alerts :options="alerts.parts_list_two">
<template v-slot:content>
<p>
It is recommended to source main parts from AliExpress as it is much cheaper.
It is recommended to source the main parts from AliExpress as it is much cheaper.
</p>
</template>
</Alerts>
@ -36,32 +36,44 @@ import PartsList from '../../vue/parts_list/PartsList.vue'
## Camera setup
- 2x ESP-CAM-32 modules [AliExpress here](https://a.aliexpress.com/_mKjL9Cq)
- ### 2x ESP-CAM-32 modules
[AliExpress](https://a.aliexpress.com/_mKjL9Cq)
- 2x ov2640 160° fov IR / Night vers 75mm (850nm) [AliExpress here](https://a.aliexpress.com/_mrNbZww) or Amazon alternative cams that you will have to manually remove the IR filter on [here](https://www.amazon.com/Camera-Aideepen-Wide-Angle-Megapixel-Support/dp/B09XXPX4SP/)
- ### 2x ov2640 160° FOV IR / Night vers 75mm (850nm)
[AliExpress](https://a.aliexpress.com/_mrNbZww)
[Amazon alternative](https://www.amazon.com/Camera-Aideepen-Wide-Angle-Megapixel-Support/dp/B09XXPX4SP/) (note that you will have to manually remove the IR filter)
- 1x ESP-CAM programmer/ MB [AliExpress here](https://a.aliexpress.com/_mPaPgPu)
- ### 1x ESP-CAM programmer / MB
[AliExpress](https://a.aliexpress.com/_mPaPgPu)
[Amazon](https://www.amazon.com/DORHEA-Bluetooth-Development-4-75V-5-25V-Raspberry/dp/B08ZS5YWCG/)
for 3 ESP32-Cams and programmers without the proper cameras
Here is an Amazon link for 3 ESP32-Cams and programmers without the proper cameras [here](https://www.amazon.com/ESP32-CAM-ESP32-CAM-MB-Development-Compatible-Raspberry/dp/B097H2KLCH)
- ### 1x USB type-A male port to power both ESPs
[Bare breakout on AliExpress](https://www.aliexpress.com/item/2255801092919590.html)
[Amazon](https://www.amazon.com/10Gtek-DIP-Breakout-Adapter-2-54mm/dp/B09LC8WQCD/)
\
[Or one with a cover on AliExpress](https://www.aliexpress.com/item/2251832820552545.html)
[Amazon](https://www.amazon.com/Pigtail-Extension-Cables-Connector-Replacement/dp/B09ZQNJ2DJ/)
- ### 1x Lower gauge wire to power ESPs
[28 AWG gauge wire from AliExpress](https://a.aliexpress.com/_mK72cy6)
[28 AWG Amazon](https://www.amazon.com/Fermerry-Silicone-Stranded-Copper-Electrical/dp/B089CTT5X1/)
- 1x USB type-A male port to power both ESPs
[Bare breakout on AliExpress here](https://www.aliexpress.com/item/2255801092919590.html) or [Amazon here](https://www.amazon.com/10Gtek-DIP-Breakout-Adapter-2-54mm/dp/B09LC8WQCD/)
[Or one with a cover on AliExpress here](https://www.aliexpress.com/item/2251832820552545.html) or [Amazon here](https://www.amazon.com/Pigtail-Extension-Cables-Connector-Replacement/dp/B09ZQNJ2DJ/)
- 1x Lower gauge wire to power ESPs
[28 gauge wire from AliExpress here](https://a.aliexpress.com/_mK72cy6) or [Amazon here](https://www.amazon.com/Fermerry-Silicone-Stranded-Copper-Electrical/dp/B089CTT5X1/)
Reccommended:
- 2x External antennas for ESPs [AliExpress here](https://www.aliexpress.com/item/2255800868378357.html) or [Amazon here](https://www.amazon.com/gp/product/B09K3ZPY5Z/)
- ### 2x External antennas for ESPs
[AliExpress](https://www.aliexpress.com/item/2255800868378357.html)
[Amazon](https://www.amazon.com/gp/product/B09K3ZPY5Z/)
## IR Emitters
- 4x Unfocused SMD IR emitters
Recomended ones [from LCSC here](https://www.lcsc.com/product-detail/Infrared-IR-LEDs_XINGLIGHT-XL-3216HIRC-850_C965891.html).
Alternative ones [from Digikey here](https://www.digikey.com/en/products/detail/inolux/IN-P32ZTIR/10384796). The difference between them is the ones from LCSC are rated for lower power, which means in the event of a short or mishap they should be safer, hence why they are recommended.
### IR LED kit
If you do not want to source things from multiple places or save money or time on assembly, you can buy a LED kit from me.
[Pre soldered kit](https://www.tindie.com/products/27837/)
[Raw component kit](https://www.tindie.com/products/27736/)
### Alternatively you can source the parts yourself:
- 4x Unfocused SMD IR emitters
[(Recomended) from LCSC here](https://www.lcsc.com/product-detail/Infrared-IR-LEDs_XINGLIGHT-XL-3216HIRC-850_C965891.html).
[(Alternative) from Digikey here](https://www.digikey.com/en/products/detail/inolux/IN-P32ZTIR/10384796).
The difference between them is the ones from LCSC are rated for lower power, which means in the event of a short or mishap they should be safer, as well as being smaller in footprint, hence why they are recommended.
<Alerts :options="alerts.parts_list_four">
<template v-slot:content>
<p>
@ -82,32 +94,30 @@ Alternative ones [from Digikey here](https://www.digikey.com/en/products/detail/
- 4x IR emitter PCBs (highly recommended) Gerber files and schematics located [here.](https://github.com/RedHawk989/EyeTrackVR-Hardware/tree/main/IR%20Emmitter)
- 2x 698-710ohm resistors or the more recommend way, 4x 350ohm 1206 SMD resistors for IR emitters (If you are not using PCBs for the emitters then buying regular through-hole resistors is acceptable)
- 4x 350ohm 1206 SMD resistors for IR emitters (If you are not using PCBs for the emitters then buying regular through-hole resistors is acceptable)
- [357 ohm from Digikey here](https://www.digikey.com/en/products/detail/stackpole-electronics-inc/RMCF1206FT357R/1759919)
- [348 ohm from LCSC here](https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_BOURNS-CR1206-FX-3480ELF_C205328.html)
- [357 ohm Digikey here](https://www.digikey.com/en/products/detail/stackpole-electronics-inc/RMCF1206FT357R/1759919)
- [348 ohm LCSC here](https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_BOURNS-CR1206-FX-3480ELF_C205328.html)
or
- [698 ohm from LCSC here](https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_FOJAN-FRC1206F6980TS_C2933749.html)
I have a kit with the resistors, IR LEDs, and PCBs on [Tindie here.](https://www.tindie.com/products/eyetrackvr/eyetrackvr-pcbs-components-kit/)
I also have a pre-soldered kit [also on Tindie here](https://www.tindie.com/products/eyetrackvr/assembled-eyetrackvr-ir-led-kit/)
This ensures you get the correct IR emitter parts.
If you are a Patreon please check out discount codes available to you, and also check out unit pricing.
- 1x Wire to power IR emitters
[32 gauge wire from AliExpress here](https://a.aliexpress.com/_mK72cy6)
- 1x Wire to power IR emitters
[34 AWG AliExpress](https://www.aliexpress.com/item/3256804720067942.html)
## Other parts
## Misc parts
- 1x Hot glue or another form of glue. Hot glue gun from [AliExpress here](https://www.aliexpress.com/item/3256803968572059.html) or [Amazon here](https://www.amazon.com/Assark-Sticks-School-Repairs-20W/dp/B09FYWQ44L/)
- 1x Hot glue or another form of glue.
[AliExpress](https://www.aliexpress.com/item/3256803968572059.html)
[Amazon](https://www.amazon.com/Assark-Sticks-School-Repairs-20W/dp/B09FYWQ44L/)
- 1x Soldering iron and solder (lead-free solder highly recommended) Generic soldering iron from [AliExpress here](https://www.aliexpress.com/item/3256801448141079.html) or [Amazon here](https://www.amazon.com/Liouhoum-Auto-Sleep-Adjustable-Temperature-Thermostatic/dp/B08PZBPXLZ/ref=sr_1_9)
- 1x Soldering iron and solder
[AliExpress](https://www.aliexpress.com/item/3256801448141079.html)
[Amazon](https://www.amazon.com/Liouhoum-Auto-Sleep-Adjustable-Temperature-Thermostatic/dp/B08PZBPXLZ/ref=sr_1_9)
## 3D Printed Mounts
Mounts with a `★` next to them are the reccomended mounts for the respected hmd. This is based user feedback on what works best for the most people.
Mounts with a `★` next to them are the recommended mounts for the respected hmd. This is based on user feedback on what works best for most people.
<PartsList />