From 857c181b7873ea15027409cb6a6877cac1b50e01 Mon Sep 17 00:00:00 2001
From: Prohurtz <48768484+RedHawk989@users.noreply.github.com>
Date: Thu, 11 Aug 2022 14:36:33 -0700
Subject: [PATCH] Delete Wiring_Guide.md
depreciated
---
docs/_pages/Wiring_Guide.md | 46 -------------------------------------
1 file changed, 46 deletions(-)
delete mode 100644 docs/_pages/Wiring_Guide.md
diff --git a/docs/_pages/Wiring_Guide.md b/docs/_pages/Wiring_Guide.md
deleted file mode 100644
index 97a1689..0000000
--- a/docs/_pages/Wiring_Guide.md
+++ /dev/null
@@ -1,46 +0,0 @@
----
-layout: page
-title: Wiring Guide
-permalink: /wireguide
-nav_order: 4
-parent: How to build
----
-## V2 Setup
-
-{% include custom/images/image_2.html url="https://imgur.com/2E8vY4W.png" max-width="500" caption="Basic Full Wiring Diagram With IR PCBs V2" alt="drawing" %}
-
-
-{% include custom/alerts/Tip.html content="Tinning your wires before connecting them is a good idea" %}
-
-
-{% include custom/images/image_2.html url="https://imgur.com/BViCBrn.png" max-width="200" caption="IR PCB V2 Emitter Back Side Wiring for 2 350ohm Resistors" alt="drawing" %}
-
-
-{% include custom/alerts/Warning.html content="The 2 350ohm resistors should connect the each side of the resistor pad and NOTHING ELSE. Its important that it does not touch any other pad." %}
-
-
-{% include custom/alerts/Note.html content="Alternatively you can wire it like the 1 resistor one, but add a secondary one in the 5v in wire." %}
-
-
-{% include custom/images/image_2.html url="https://imgur.com/va3tZOh.png" max-width="200" caption="IR PCB Emitter Back Side Wiring for 1 700-710 ohm Resistor" alt="drawing" %}
-
-
-Soldering demostration of soldering a IR LED to V2 PCB [https://www.youtube.com/watch?v=8vWMr4L9WK](https://www.youtube.com/watch?v=8vWMr4L9WK8)
-
-
-
-{% include custom/alerts/Warning.html content="Do not solder the 1206 sized LEDs at temperatures exceeding 245°C as they will burn and become unusable. Buying low temp solder is highly recommended." %}
-
-
-## V3 Setup
-
-{% include custom/images/image_2.html url="https://i.imgur.com/u1UeAZT.png" max-width="400" caption="Basic Full Wiring Diagram With IR PCBs V3" alt="drawing" %}
-
-
-{% include custom/alerts/Tip.html content="Tinning your wires before connecting them is a good idea" %}
-
-
-{% include custom/images/image_2.html url="https://i.imgur.com/Wuv5ezQ.png" max-width="200" caption="IR PCB V3 Emitter Back Side Wiring for 2 Resistors (recommended)" alt="drawing" %}
-
-
-