Delete Wiring_Guide.md

depreciated
This commit is contained in:
Prohurtz 2022-08-11 14:36:33 -07:00 committed by GitHub
parent b26d21fcaf
commit 857c181b78
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -1,46 +0,0 @@
---
layout: page
title: Wiring Guide
permalink: /wireguide
nav_order: 4
parent: How to build
---
## V2 Setup
{% include custom/images/image_2.html url="https://imgur.com/2E8vY4W.png" max-width="500" caption="Basic Full Wiring Diagram With IR PCBs V2" alt="drawing" %}
<br>
{% include custom/alerts/Tip.html content="Tinning your wires before connecting them is a good idea" %}
{% include custom/images/image_2.html url="https://imgur.com/BViCBrn.png" max-width="200" caption="IR PCB V2 Emitter Back Side Wiring for 2 350ohm Resistors" alt="drawing" %}
<br>
{% include custom/alerts/Warning.html content="The 2 350ohm resistors should connect the each side of the resistor pad and <b>NOTHING ELSE</b>. Its important that it does not touch any other pad." %}
<br>
{% include custom/alerts/Note.html content="Alternatively you can wire it like the 1 resistor one, but add a secondary one in the 5v in wire." %}
<br>
{% include custom/images/image_2.html url="https://imgur.com/va3tZOh.png" max-width="200" caption="IR PCB Emitter Back Side Wiring for 1 700-710 ohm Resistor" alt="drawing" %}
<br>
Soldering demostration of soldering a IR LED to V2 PCB [https://www.youtube.com/watch?v=8vWMr4L9WK](https://www.youtube.com/watch?v=8vWMr4L9WK8)
<iframe width="2034" height="814" src="https://www.youtube.com/embed/8vWMr4L9WK8" title="Soldering of an IR emitter for eyetrackVR" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
{% include custom/alerts/Warning.html content="Do not solder the 1206 sized LEDs at temperatures exceeding 245°C as they will burn and become unusable. Buying low temp solder is highly recommended." %}
<br>
## V3 Setup
{% include custom/images/image_2.html url="https://i.imgur.com/u1UeAZT.png" max-width="400" caption="Basic Full Wiring Diagram With IR PCBs V3" alt="drawing" %}
<br>
{% include custom/alerts/Tip.html content="Tinning your wires before connecting them is a good idea" %}
<br>
{% include custom/images/image_2.html url="https://i.imgur.com/Wuv5ezQ.png" max-width="200" caption="IR PCB V3 Emitter Back Side Wiring for 2 Resistors (recommended)" alt="drawing" %}
<br>