Update Valve_Index.md

This commit is contained in:
Frosty 2024-04-12 16:54:17 -04:00 committed by GitHub
parent 3d003a2d79
commit 8ac03c9591
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194

View File

@ -44,7 +44,9 @@ Start with inserting your heat inserts to the designated holes on the frunk. Pla
- When heating up the inserts, **let the weight of the soldering iron do the work**, they make take a few seconds to start moving on their own. - When heating up the inserts, **let the weight of the soldering iron do the work**, they make take a few seconds to start moving on their own.
- **Do not push down**, and remove the iron when they are level with the print. It doesn't need to be perfect, so take your time! - **Do not push down**, and remove the iron when they are level with the print. It doesn't need to be perfect, so take your time!
![FRUNK](https://i.imgur.com/Wc2mbKE.png) ![FRUNK](https://i.imgur.com/5xzpTqa.png)
Bottom picture courtesy of amoistman
Next, place a heat insert into the bigger hole of the facial tracker bridge Next, place a heat insert into the bigger hole of the facial tracker bridge
@ -52,7 +54,14 @@ Next, place a heat insert into the bigger hole of the facial tracker bridge
Lastly, place another heat insert into the thick side of the beer hinge Lastly, place another heat insert into the thick side of the beer hinge
![HINGE](https://i.imgur.com/tVD4lAK.png)
![HINGE](https://i.imgur.com/R3Uwllz.png)
Your finished heat inserts should look like this
![INSERTSEXAMPLE](https://i.imgur.com/2z0TD3L.jpeg)
Picture courtesy of amoistman
#### 2. Screws #### 2. Screws
@ -78,6 +87,7 @@ Use either an M4x10 or an M4x30. I find the M4x10 sometimes loses tension, while
Your final result should look like this Your final result should look like this
![FINAL](https://i.imgur.com/1h7ex2y.jpg) ![FINAL](https://i.imgur.com/1h7ex2y.jpg)
#### 3. Mounting components #### 3. Mounting components
You can now push the XIAO's into the mount, making sure they are down snug, if you haven't already. You can now push the XIAO's into the mount, making sure they are down snug, if you haven't already.