Update Valve_Index.md

This commit is contained in:
Frosty 2024-04-12 16:54:17 -04:00 committed by GitHub
parent 3d003a2d79
commit 8ac03c9591
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194

View File

@ -44,7 +44,9 @@ Start with inserting your heat inserts to the designated holes on the frunk. Pla
- When heating up the inserts, **let the weight of the soldering iron do the work**, they make take a few seconds to start moving on their own.
- **Do not push down**, and remove the iron when they are level with the print. It doesn't need to be perfect, so take your time!
![FRUNK](https://i.imgur.com/Wc2mbKE.png)
![FRUNK](https://i.imgur.com/5xzpTqa.png)
Bottom picture courtesy of amoistman
Next, place a heat insert into the bigger hole of the facial tracker bridge
@ -52,7 +54,14 @@ Next, place a heat insert into the bigger hole of the facial tracker bridge
Lastly, place another heat insert into the thick side of the beer hinge
![HINGE](https://i.imgur.com/tVD4lAK.png)
![HINGE](https://i.imgur.com/R3Uwllz.png)
Your finished heat inserts should look like this
![INSERTSEXAMPLE](https://i.imgur.com/2z0TD3L.jpeg)
Picture courtesy of amoistman
#### 2. Screws
@ -78,6 +87,7 @@ Use either an M4x10 or an M4x30. I find the M4x10 sometimes loses tension, while
Your final result should look like this
![FINAL](https://i.imgur.com/1h7ex2y.jpg)
#### 3. Mounting components
You can now push the XIAO's into the mount, making sure they are down snug, if you haven't already.