diff --git a/docs/_pages/Full_Build_Guide.md b/docs/_pages/Full_Build_Guide.md index 47b2273..4ea7cdb 100644 --- a/docs/_pages/Full_Build_Guide.md +++ b/docs/_pages/Full_Build_Guide.md @@ -141,41 +141,6 @@ Negative: This marks the negative side of the LED. Positive: This marks the positive side of the LED. -## Solder resistors on PCB V3. - -You only need 1 PCB to have resistors per eye. - -Tin the resistor pads. Note: in this example, I use too much solder, it should only be enough to lightly cover the pad. -{% include custom/images/image_2.html url="https://i.imgur.com/gb4etdB.jpg" max-width="400" caption="" alt="img" %} - - -Next, grab a resistor and hold it on the pads. -{% include custom/images/image_2.html url="https://i.imgur.com/ev5QFch.jpg" max-width="400" caption="" alt="img" %} - -While holding the resistor add solder to your soldering iron and apply it to the resistor. - -I like to do this by having a piece of my solder stick up in the air and then put it on my iron that way. -{% include custom/images/image_2.html url="https://i.imgur.com/8jCQOHw.jpg" max-width="400" caption="" alt="img" %} - -Flip the PCB and solder the other end. -{% include custom/images/image_2.html url="https://i.imgur.com/CHUb7Iv.jpg" max-width="400" caption="" alt="img" %} - -Now repeat for the other one. -{% include custom/images/image_2.html url="https://i.imgur.com/jZYAm5O.jpg" max-width="400" caption="" alt="img" %} - - -## Solder LEDs on PCB V3. -Tin the LED pads. -{% include custom/images/image_2.html url="https://i.imgur.com/pjvLHJL.jpg" max-width="400" caption="" alt="img" %} - -Orientate the LED and hold in place. -{% include custom/images/image_2.html url="https://i.imgur.com/RbHZQhl.jpg" max-width="400" caption="" alt="img" %} - -Solder one end. -{% include custom/images/image_2.html url="https://i.imgur.com/VyClWvp.jpg" max-width="400" caption="" alt="img" %} - -Flip areound and solder the other end. -{% include custom/images/image_2.html url="https://i.imgur.com/tFCQTqE.jpg" max-width="400" caption="" alt="img" %} ## Solder resistors on PCB V2. @@ -218,6 +183,45 @@ Basic full wiring diagram of IR PCBs V2 The PCB that receives the 5V power is the one with the resistor. The second one, which gets its power from the ground pin of the first, does not have a resistor on it and its power input pin is the AR pin (After-Resistor). The 2nd PCBs ground pin goes to the ground of the system, in the diagram it is the ESPs ground pin. +## Solder resistors on PCB V3. + +You only need 1 PCB to have resistors per eye. + +Tin the resistor pads. Note: in this example, I use too much solder, it should only be enough to lightly cover the pad. +{% include custom/images/image_2.html url="https://i.imgur.com/gb4etdB.jpg" max-width="400" caption="" alt="img" %} + + +Next, grab a resistor and hold it on the pads. +{% include custom/images/image_2.html url="https://i.imgur.com/ev5QFch.jpg" max-width="400" caption="" alt="img" %} + +While holding the resistor add solder to your soldering iron and apply it to the resistor. + +I like to do this by having a piece of my solder stick up in the air and then put it on my iron that way. +{% include custom/images/image_2.html url="https://i.imgur.com/8jCQOHw.jpg" max-width="400" caption="" alt="img" %} + +Flip the PCB and solder the other end. +{% include custom/images/image_2.html url="https://i.imgur.com/CHUb7Iv.jpg" max-width="400" caption="" alt="img" %} + +Now repeat for the other one. +{% include custom/images/image_2.html url="https://i.imgur.com/jZYAm5O.jpg" max-width="400" caption="" alt="img" %} + + +## Solder LEDs on PCB V3. +Tin the LED pads. +{% include custom/images/image_2.html url="https://i.imgur.com/pjvLHJL.jpg" max-width="400" caption="" alt="img" %} + +Orientate the LED and hold in place. +{% include custom/images/image_2.html url="https://i.imgur.com/RbHZQhl.jpg" max-width="400" caption="" alt="img" %} + +Solder one end. +{% include custom/images/image_2.html url="https://i.imgur.com/VyClWvp.jpg" max-width="400" caption="" alt="img" %} + +Flip areound and solder the other end. +{% include custom/images/image_2.html url="https://i.imgur.com/tFCQTqE.jpg" max-width="400" caption="" alt="img" %} + + + + ## Wire up the PCBs V3. {% include custom/images/image_2.html url="https://i.imgur.com/AxgHiAU.png" max-width="500" caption="" alt="drawing" %}