docs: Merge pull request #14 from Frosty704/main

updated part links, update descriptions to clear any possible confusion
This commit is contained in:
Prohurtz 2024-02-13 22:37:59 -06:00 committed by GitHub
commit 94b058498e
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
2 changed files with 10 additions and 7 deletions

View File

@ -65,6 +65,7 @@ With that in mind, here are the required parts for the setup.
- 2x XIAO ESP32-S3 Sense Modules - 2x XIAO ESP32-S3 Sense Modules
Very small size, wireless and wired support, does not require an additional programmer or separate antennas: Very small size, wireless and wired support, does not require an additional programmer or separate antennas:
[SeedStudio](https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html) [SeedStudio](https://www.seeedstudio.com/XIAO-ESP32S3-Sense-p-5639.html)
[AliExpress](https://www.aliexpress.com/item/3256804601970891.html)
Alternatively: Alternatively:
- 2x Freenove ESP 32-S3 WROOM - 2x Freenove ESP 32-S3 WROOM
@ -103,7 +104,7 @@ If you decide to remove the filter, wear eye protection while doing so, the remo
- #### 2x OV2640 160° FOV IR / Night vers 75mm (850nm) - #### 2x OV2640 160° FOV IR / Night vers 75mm (850nm)
[AliExpress](https://a.aliexpress.com/_mrNbZww) (select 75MM-160 850nm) [AliExpress](https://www.aliexpress.com/item/3256802853835121.html)
[Amazon alternative](https://www.amazon.com/Camera-Aideepen-Wide-Angle-Megapixel-Support/dp/B09XXPX4SP/) (note that you [Amazon alternative](https://www.amazon.com/Camera-Aideepen-Wide-Angle-Megapixel-Support/dp/B09XXPX4SP/) (note that you
will have to [manually remove the IR filter](https://www.youtube.com/watch?v=QYH-FWvDbDc)) will have to [manually remove the IR filter](https://www.youtube.com/watch?v=QYH-FWvDbDc))
@ -120,7 +121,7 @@ Certain mounts may require a cable extension (ex: MUTE's frunk mod)
To use a mount like that you will need a cable and a connector for each camera. To use a mount like that you will need a cable and a connector for each camera.
Headsets like the Quest 2 do not require extensions if the camera boards are mounted at the bottom of the headset, near the facial interface. Headsets like the Quest 2 do not require extensions if the camera boards are mounted at the bottom of the headset, near the facial interface.
Extensions (select 0.5mm pitch type A) [AliExpress](https://a.aliexpress.com/_mqVcK8a) (200mm for MUTE's) Extensions (select 0.5mm, A-Forward Direction, 24P) [AliExpress](https://www.aliexpress.com/item/3256802223169786.html) (200mm for MUTE's)
Connectors (select 24P) [Aliexpress](https://www.aliexpress.com/item/3256804096715690.html) Connectors (select 24P) [Aliexpress](https://www.aliexpress.com/item/3256804096715690.html)
@ -128,11 +129,11 @@ Connectors (select 24P) [Aliexpress](https://www.aliexpress.com/item/32568040967
- 1x USB 3.0+ hub - 1x USB 3.0+ hub
The hub needs to support MTT if you wish to use a vive face tracker with the ESPs. Here is a hub that supports MTT and is not expensive [Amazon](https://www.amazon.com/dp/B09NDQGSPR) The hub needs to support MTT if you wish to use a vive face tracker with the ESPs. Here is a hub that supports MTT and is not expensive [Amazon](https://www.amazon.com/dp/B09NDQGSPR)
Ensure that it is of good quality, lightweight, compact in size, and I suggest a minimum of three ports - one for the face tracker and two for ESP32-S3 boards. Ensure that it is of good quality, lightweight, compact in size, and I suggest a minimum of four ports - one for the face tracker, one for the LED kit, and two for ESP32-S3 boards.
Ensure that you acquire appropriate USB-A to USB-C adapters wherever required. For example the Valve Index only has one USB-A port. Ensure that you acquire appropriate USB-A to USB-C adapters wherever required. For example the Valve Index only has one USB-A port. Be wary that "mini" adapters with the short ends may not work properly. Ensure the adapter has a long end.
Such adapter [Amazon.](https://a.co/d/gSWydCY) Such adapter [Amazon.](https://a.co/d/e5C2u82)
- 2x USB C cables (as short as possible) to connect both ESPs - 2x USB C cables (as short as possible) to connect both ESPs (select 0.05m/5cm) [AliExpress](https://www.aliexpress.com/item/3256804171454889.html) or [AliExpress USB C to USB A](https://www.aliexpress.com/item/3256805789406634.html)
As the ESP32-S3 has USB-C connectors, you may require some USB-C to USB-A cables depending on your USB hub. As the ESP32-S3 has USB-C connectors, you may require some USB-C to USB-A cables depending on your USB hub.
It's worth noting that the HTC Face Tracker requires a USB-C port, so you may need to consider this requirement as well. It's worth noting that the HTC Face Tracker requires a USB-C port, so you may need to consider this requirement as well.
You may also make custom cables using USB breakout boards of your choice and wire. You may also make custom cables using USB breakout boards of your choice and wire.
@ -162,6 +163,8 @@ We recommend getting the official kits:
- [Solder wires V4 kit](https://store.eyetrackvr.dev/products/v4-mini-some-assemblly-required) - requires you to solder your own wires to the LED boards. - [Solder wires V4 kit](https://store.eyetrackvr.dev/products/v4-mini-some-assemblly-required) - requires you to solder your own wires to the LED boards.
- [Solder V4 Lite kit](https://store.eyetrackvr.dev/products/v4-1-lite-diy-led-kit) - requires you to solder 2 through hole components and wires to the LED boards.
#### Alternatively you can source the parts for V3 yourself: #### Alternatively you can source the parts for V3 yourself:

View File

@ -41,7 +41,7 @@ const printed_parts = {
hyper_links: [ hyper_links: [
{ {
url: "https://github.com/Physics-Dude/Phys-Index-EyetrackVR-HW/blob/main/ETVR%20ValveIndex%20Cam-LED%20Mount%20Rings/Index-EyetrackVRv4%20v18%20Print%20Me.stl", url: "https://github.com/Physics-Dude/Phys-Index-EyetrackVR-HW/blob/main/ETVR%20ValveIndex%20Cam-LED%20Mount%20Rings/Index-EyetrackVRv4%20v18%20Print%20Me.stl",
desc: "★ V4 IR and Camera mount by Physics Dude and bitbyt3r" desc: "★ V4 IR and Camera mount by Physics Dude and bitbyt3r. Will require extra 110mm cables for solder-less"
}, },
{ {
url: "https://github.com/MUTEtheCyberwolf/VALVE-INDEX-DEV-Frunk-1.0/tree/main/3D%20Print%20Files%20STL(Ascii)/Gen%203%20Prohurtz%20V2%20Mounts%20(VROptician)", url: "https://github.com/MUTEtheCyberwolf/VALVE-INDEX-DEV-Frunk-1.0/tree/main/3D%20Print%20Files%20STL(Ascii)/Gen%203%20Prohurtz%20V2%20Mounts%20(VROptician)",