mirror of
https://github.com/EyeTrackVR/EyeTrackVR-Docs.git
synced 2025-09-26 23:09:15 +08:00
small changes for clarity
This commit is contained in:
parent
363d89476b
commit
9a4837bbf2
@ -52,7 +52,7 @@ Once you've selected your board, click **Confirm** to move on to the next step.
|
||||
|
||||
### Step 4: Flash firmware.
|
||||
|
||||
Once you're ready, hold down the **B** button on your board and connect it to your PC.
|
||||
Once you're ready, hold down the **B** or **IO0** button on your board and connect it to your PC. (The button may be small, but it's there).
|
||||
Next, click **Install OpenIris** and select the port corresponding to your board to complete the installation.
|
||||
|
||||
<ImageCard :options="image_settings.flashing_tool_flash_firmware"/>
|
||||
@ -80,7 +80,7 @@ If the logs don't look right, ensure that your camera is properly connected to t
|
||||
|
||||
::: info Note
|
||||
|
||||
- Please note that 5GHz networks are not currently supported, so you will need to use a 2.4GHz network.
|
||||
- Please note that 5GHz networks are not supported by the hardware, so you will need to use a 2.4GHz network.
|
||||
|
||||
:::
|
||||
|
||||
@ -110,7 +110,7 @@ You'll need to provide the password used to connect to the selected Wi-Fi networ
|
||||
|
||||
### Step 3: Send wifi credentials.
|
||||
|
||||
Once the installation is complete, unplug your board, then reconnect it to the PC without pressing any buttons and press **Send credentials**
|
||||
Once the installation is complete, unplug your board, then reconnect it to the PC without pressing any buttons and press **Send credentials**.
|
||||
|
||||
<ImageCard :options="image_settings.send_wifi_credentials"/>
|
||||
|
||||
@ -120,6 +120,8 @@ Once the installation is complete, unplug your board, then reconnect it to the P
|
||||
|
||||
After sending is complete, disconnect your board, then reconnect it to the PC without pressing any buttons, and click **Show logs**.
|
||||
<br/>
|
||||
Scroll down to find the text labeled **IP: 192.168.XXX.XXX**.
|
||||
Scroll down to find the text labeled **`IP: 192.168.XXX.XXX`**.
|
||||
|
||||
<ImageCard :options="image_settings.flasher_camera_preview"/>
|
||||
|
||||
This IP can then be entered into the app or a web browser like: `http://192.168.XXX.XXX`
|
Loading…
Reference in New Issue
Block a user