mirror of
https://github.com/EyeTrackVR/EyeTrackVR-Docs.git
synced 2025-11-04 14:49:44 +08:00
Update Valve_Index.md
This commit is contained in:
parent
899c5871ef
commit
ae59174019
@ -1,5 +1,17 @@
|
||||
# Valve Index
|
||||
|
||||
### Recommended Valve Index lens mounts
|
||||
|
||||
[Physics-Dude's 160° V18](https://github.com/Physics-Dude/Phys-Index-EyetrackVR-HW/blob/main/ETVR%20ValveIndex%20Cam-LED%20Mount%20Rings/Index-EyetrackVRv4%20v18%20Print%20Me.stl) (mirror the STL for left)
|
||||
|
||||
[Foow17's 130 / 160°](https://makerworld.com/en/models/196741#profileId-217255)
|
||||
|
||||
[Foow17's 130 / 160° VROPTICIAN](https://makerworld.com/en/models/196791#profileId-217311)
|
||||
|
||||
[Frosty704's 160° WidmoVR Mount](https://github.com/Frosty704/indexwidmo-eyetrackvr)
|
||||
|
||||
Please note due to the LED positioning, these will **require you to extend the LED wire, or get [110mm extensions](https://store.eyetrackvr.dev/products/2x-110mm-replacement-wires)**
|
||||
|
||||
## MUTEtheCyberwolf's DEV Frunk Mod:
|
||||

|
||||

|
||||
@ -32,7 +44,7 @@ You will need to print:
|
||||
- 1x Eyetrack VR Prototype XIAO Mount.stl
|
||||
- 1x FacialTrackerBeerHingeVIDEVFrunk1.stl
|
||||
- 1x FacialTrackerBridgeVIDEVFrunk1.stl
|
||||
- Alternatively, if you have the [LDLRUI USB HUB](https://www.amazon.com/LDLrui-4-Port-Splitter-Multiport-Adapter/dp/B0BLHCD7FS), [this modified version](https://github.com/Frosty704/mods-eyetrackvr/blob/main/ldlrui%20case%20and%20bridge%20merged-FacialTrackerBridgeVIDEVFrunk1.stl) of the DEV Frunk Bridge by Frosty can snap fit the hub onto the bridge. [Example](https://i.imgur.com/kRvx56r.jpeg)
|
||||
- Alternatively, if you have the [LDLRUI USB HUB](https://www.amazon.com/LDLrui-4-Port-Splitter-Multiport-Adapter/dp/B0BLHCD7FS), [this modified version](https://github.com/Frosty704/mods-eyetrackvr/blob/main/ldlrui%20case%20and%20bridge%20merged-FacialTrackerBridgeVIDEVFrunk1.stl) of the DEV Frunk Bridge can snap fit the hub onto the bridge. [Example](https://i.imgur.com/kRvx56r.jpeg)
|
||||
- 1x ValveIndexDEVFrunk1.stl
|
||||
- Alternatively, if you are interested in routing the ribbon cables internally, [this modified DEV Frunk](https://github.com/Frosty704/mods-eyetrackvr/blob/main/ValveIndexDEVFrunk1_MODIFIED.stl) has holes at the top for sliding through ribbon cables and power cables. [Example](https://i.imgur.com/RcYQ8xd.png)
|
||||
|
||||
@ -102,6 +114,10 @@ Next, place the coverplate ontop of the LED PCB until the front of it snaps down
|
||||
|
||||
Then you can slide the retention clip over your XIAO mount to keep them in place.
|
||||
|
||||
#### 3. (Cont.) Mounting lens components
|
||||
|
||||
This will differ depending on how you want to route cables, which mount you have, etc
|
||||
|
||||

|
||||
|
||||
#### 4. Replacing frunk
|
||||
|
||||
Loading…
Reference in New Issue
Block a user