docs: fix broken links in full_build.md

This commit is contained in:
ZanzyTHEbar 2023-01-23 18:25:12 +00:00
parent b4a15000d1
commit c5cd3a443b

View File

@ -86,13 +86,13 @@ Slide your ESP into the programmer, and note the USB port goes away from the ESP
## Step 8: Configure Visual Studio Code and prepare to flash the firmware
Check out our guide on [Setting up VS Code](https://redhawk989.github.io/EyeTrackVR/setting-up-firmware-enviroment/)
Check out our guide on [Setting up VS Code](../firmware_guide/setup_vscode/)
Once VS Code is set up, move on to the next step.
## Step 9: Plug in your ESP and flash the firmware
Our guide, [Building and uploading the firmware manually](https://redhawk989.github.io/EyeTrackVR/building-and-flashing-firmware-manually/) has steps on how to do this.
Our guide, [Building and uploading the firmware manually](../firmware_guide/upload_firmware/) has steps on how to do this.
After it has flashed, make sure you get a video stream in your browser, then power it down and flash your next ESP.
## Step 10: Connect your power wires to a USB Type-A board