mirror of
https://github.com/EyeTrackVR/EyeTrackVR-Docs.git
synced 2025-11-04 14:49:44 +08:00
70 lines
2.6 KiB
Markdown
70 lines
2.6 KiB
Markdown
---
|
|
layout: page
|
|
title: Part List
|
|
permalink: /partslist/
|
|
nav_order: 2
|
|
parent: How to build
|
|
---
|
|
|
|
## This page will include a basic part list for building an EyeTrackVR setup.
|
|
|
|
### Please note that no hardware has been fully set in stone, all purchases are at your loss if hardware changes.
|
|
|
|
|
|
It is recommended to source parts from AliExpress as it is much cheaper
|
|
|
|
|
|
## Wireless setup:
|
|
|
|
2x ESP-CAM-32 modules [AliExpress here](https://a.aliexpress.com/_mKjL9Cq)
|
|
|
|
2x ov2640 160° fov IR / Night vers 75mm (850nm) [AliExpress here](https://a.aliexpress.com/_mrNbZww)
|
|
|
|
1x ESP-CAM programmer/ MB [AliExpress here](https://a.aliexpress.com/_mPaPgPu)
|
|
|
|
All three of the above can be found in a kit from [AliExpress here](https://a.aliexpress.com/_mNSRfUe) make sure to get 2 of the 75mm-160- 850nm version.
|
|
|
|
1x USB type-A male port to power both ESPs
|
|
[AliExpress here](https://a.aliexpress.com/_mOCRTcq)
|
|
|
|
1x Lower gauge wire to power ESPs
|
|
[28 gauge wire from AliExpress here](https://a.aliexpress.com/_mK72cy6)
|
|
|
|
|
|
|
|
## Wired setup
|
|
|
|
2x Wired Ov5640 160 deg cameras [AliExpress here](https://www.aliexpress.com/item/2255799933896897.html)
|
|
|
|
**Please note: if the wired option is used, you will need to dissasemble the camera to remove the ir filters.**
|
|
**I would reccomend getting extra cameras, either the full thing above or just the camera [from AliExpress here](https://www.aliexpress.com/item/3256803544318475.html)**
|
|
|
|
1x USB type-A male port to power both IR emmitters
|
|
[AliExpress here](https://a.aliexpress.com/_mOCRTcq)
|
|
|
|
|
|
|
|
## IR Emitters
|
|
|
|
4x Unfocused SMD IR emitters
|
|
Recommend ones [from Digikey here](https://www.digikey.com/en/products/detail/inolux/IN-P32ZTIR/10384796) (DO NOT BUY FOCUSED ONES! If they look like something you would find in a TV remote do not use them, if you aren't sure exactly what you are doing, buy them from the Digikey link)
|
|
|
|
4x IR emitter PCB's (highly recommended)
|
|
|
|
2x 698-710ohm resistors or the more recommend way, 4x 350ohm 1206 SMD resistors for IR emitters (If you are not using PCB's for the emitters then buying regular through-hole resistors is acceptable)
|
|
[357 ohm from Digikey here](https://www.digikey.com/en/products/detail/stackpole-electronics-inc/RMCF1206FT357R/1759919) or
|
|
[698 ohm from LCSC here](https://lcsc.com/product-detail/Chip-Resistor-Surface-Mount_FOJAN-FRC1206F6980TS_C2933749.html)
|
|
|
|
1x Wire to power IR emitters
|
|
[32 gauge wire from AliExpress here](https://a.aliexpress.com/_mK72cy6)
|
|
|
|
|
|
|
|
## Other parts
|
|
|
|
1x Hot glue or another form of glue
|
|
|
|
1x Soldering iron and solder (lead free solder highly recommended)
|
|
|
|
3d printed mounts or some form of glue (not recommended but theoretically doable)
|