EyeTrackVR-Docs/docs/_pages/Wiring_Guide.md
2022-07-22 07:18:11 -07:00

2.2 KiB

layout title permalink nav_order parent
page Wiring Guide /wireguide 4 How to build

V2 Setup

{% include custom/images/image_2.html url="https://imgur.com/2E8vY4W.png" max-width="500" caption="Basic Full Wiring Diagram With IR PCBs V2" alt="drawing" %}

{% include custom/alerts/Tip.html content="Tinning your wires before connecting them is a good idea" %}

{% include custom/images/image_2.html url="https://imgur.com/BViCBrn.png" max-width="200" caption="IR PCB V2 Emitter Back Side Wiring for 2 350ohm Resistors" alt="drawing" %}

{% include custom/alerts/Warning.html content="The 2 350ohm resistors should connect the each side of the resistor pad and NOTHING ELSE. Its important that it does not touch any other pad." %}

{% include custom/alerts/Note.html content="Alternatively you can wire it like the 1 resistor one, but add a secondary one in the 5v in wire." %}

{% include custom/images/image_2.html url="https://imgur.com/va3tZOh.png" max-width="200" caption="IR PCB Emitter Back Side Wiring for 1 700-710 ohm Resistor" alt="drawing" %}

Soldering demostration of soldering a IR LED to V2 PCB https://www.youtube.com/watch?v=8vWMr4L9WK

{% include custom/alerts/Warning.html content="Do not solder the 1206 sized LEDs at temperatures exceeding 245°C as they will burn and become unusable. Buying low temp solder is highly recommended." %}

V3 Setup

{% include custom/images/image_2.html url="https://i.imgur.com/u1UeAZT.png" max-width="400" caption="Basic Full Wiring Diagram With IR PCBs V3" alt="drawing" %}

{% include custom/alerts/Tip.html content="Tinning your wires before connecting them is a good idea" %}

{% include custom/images/image_2.html url="https://i.imgur.com/Wuv5ezQ.png" max-width="200" caption="IR PCB V3 Emitter Back Side Wiring for 2 Resistors (recommended)" alt="drawing" %}