EyeTrackVR-Docs/docs/_pages/Parts_List.md
2022-06-23 18:09:22 -07:00

3.7 KiB

layout title permalink nav_order parent
page Part List /partslist/ 2 How to build

This page will include a basic part list for building an EyeTrackVR setup

{% include custom/alerts/Warning.html content="Please note that no hardware has been fully set in stone, all purchases are at your loss if hardware changes" %}

{% include custom/alerts/Note.html content="It is recommended to source parts from AliExpress as it is much cheaper" %}

Wireless setup

All three of the above can be found in a kit from AliExpress here make sure to get 2 of the 75mm-160- 850nm version.

Wired setup

{% include custom/alerts/Warning.html content="Due to USB issues, only 1 camera per headset is supported unless you have 2 seperate USB ports to plug in to. USB hubs WILL NOT WORK." %}

{% include custom/alerts/Note.html content="if the wired option is used, you will need to disassemble the camera to remove the ir filters. I would recommend getting extra cameras, either the full thing above or just the camera" hyper_link="https://www.aliexpress.com/item/3256803544318475.html" description="from AliExpress here" %}

IR Emitters

Needed for both wireless and wired options.

  • 4x Unfocused SMD IR emitters Recommend ones from Digikey here (DO NOT BUY FOCUSED ONES! If they look like something you would find in a TV remote do not use them, if you aren't sure exactly what you are doing, buy them from the Digikey link)

  • 4x IR emitter PCB's (highly recommended)

  • 2x 698-710ohm resistors or the more recommend way, 4x 350ohm 1206 SMD resistors for IR emitters (If you are not using PCB's for the emitters then buying regular through-hole resistors is acceptable)

  • 357 ohm from Digikey here

or

I have a kit with resistors, IR LEDs, and PCBs on Tindie here.

Other parts

  • 1x Hot glue or another form of glue

  • 1x Soldering iron and solder (lead free solder highly recommended)

3d Printed Parts

{% include custom/3d_printed_parts/Parts.html %}

Other Headsets

If you own another headset not listed above, that means there are no mounts designed for them yet. If you have basic skills in modeling or think up a solution to mount cams and emitters, please try to make a mount and then let us in the discord know so it can be added here. Any headset that can fit the camera is potentially compatible. If you are willing, give it a shot to design a mount for the rest of the community.

{% include custom/alerts/Tip.html content="If you have a headset that is not listed above, please let us know in the discord so it can be added here" %}