mirror of
https://github.com/EyeTrackVR/OpenIris.git
synced 2025-11-04 15:39:42 +08:00
minor update
- add official support for the ESPWRover boards (i tested it on mine - it works)
This commit is contained in:
parent
eca62867f4
commit
b55e25971c
@ -182,6 +182,7 @@ void APIServer::rebootDevice()
|
|||||||
delay(20000);
|
delay(20000);
|
||||||
ESP.restart();
|
ESP.restart();
|
||||||
}
|
}
|
||||||
|
|
||||||
void APIServer::factoryReset()
|
void APIServer::factoryReset()
|
||||||
{
|
{
|
||||||
network->configManager->reset();
|
network->configManager->reset();
|
||||||
|
|||||||
@ -14,15 +14,15 @@ default_envs = debug ; do not change this value
|
|||||||
; The below options are available for all environments
|
; The below options are available for all environments
|
||||||
; The ssid and password are requried for the trackers to connect to your network!!!
|
; The ssid and password are requried for the trackers to connect to your network!!!
|
||||||
[wifi]
|
[wifi]
|
||||||
ssid="your_ssid_goes_here" ; your wifi network name goes here
|
ssid="LoveHouse2G" ; your wifi network name goes here
|
||||||
password="your_password_goes_here" ; Place your Wifi password here
|
password="vxwby2Gwtswp" ; Place your Wifi password here
|
||||||
OTAPassword="" ; if empty, no password will be required
|
OTAPassword="" ; if empty, no password will be required
|
||||||
OTAServerPort=3232
|
OTAServerPort=3232
|
||||||
enableADHOC=0 ; 0 = disable, 1 = enable
|
enableADHOC=0 ; 0 = disable, 1 = enable
|
||||||
adhocChannel=10 ; channel to use for adhoc network
|
adhocChannel=10 ; channel to use for adhoc network
|
||||||
|
|
||||||
; DO NOT EDIT BELOW THIS LINE UNLESS YOU KNOW WHAT YOU ARE DOING
|
; DO NOT EDIT BELOW THIS LINE UNLESS YOU KNOW WHAT YOU ARE DOING
|
||||||
[pinouts]
|
[pinoutsESPCAM]
|
||||||
; AI Tinker camera, the ov2650
|
; AI Tinker camera, the ov2650
|
||||||
PWDN_GPIO_NUM = 32
|
PWDN_GPIO_NUM = 32
|
||||||
RESET_GPIO_NUM = -1
|
RESET_GPIO_NUM = -1
|
||||||
@ -41,6 +41,25 @@ VSYNC_GPIO_NUM = 25
|
|||||||
HREF_GPIO_NUM = 23
|
HREF_GPIO_NUM = 23
|
||||||
PCLK_GPIO_NUM = 22
|
PCLK_GPIO_NUM = 22
|
||||||
|
|
||||||
|
[pinoutsESPWROVER]
|
||||||
|
; CAMERA_MODEL_WROVER_KIT
|
||||||
|
PWDN_GPIO_NUM = -1
|
||||||
|
RESET_GPIO_NUM = -1
|
||||||
|
XCLK_GPIO_NUM = 21
|
||||||
|
SIOD_GPIO_NUM = 26
|
||||||
|
SIOC_GPIO_NUM = 27
|
||||||
|
Y9_GPIO_NUM = 35
|
||||||
|
Y8_GPIO_NUM = 34
|
||||||
|
Y7_GPIO_NUM = 39
|
||||||
|
Y6_GPIO_NUM = 36
|
||||||
|
Y5_GPIO_NUM = 19
|
||||||
|
Y4_GPIO_NUM = 18
|
||||||
|
Y3_GPIO_NUM = 5
|
||||||
|
Y2_GPIO_NUM = 4
|
||||||
|
VSYNC_GPIO_NUM = 25
|
||||||
|
HREF_GPIO_NUM = 23
|
||||||
|
PCLK_GPIO_NUM = 22
|
||||||
|
|
||||||
[common]
|
[common]
|
||||||
platform = espressif32
|
platform = espressif32
|
||||||
board = esp32cam
|
board = esp32cam
|
||||||
@ -74,27 +93,12 @@ build_flags =
|
|||||||
;-include "pinout.h" ; this has been added for future movement to a proper library structure
|
;-include "pinout.h" ; this has been added for future movement to a proper library structure
|
||||||
;-include "credentials.h" ; this has been added for future movement to a proper library structure
|
;-include "credentials.h" ; this has been added for future movement to a proper library structure
|
||||||
|
|
||||||
; CAMERA PINOUT DEFINITIONS
|
|
||||||
-DPWDN_GPIO_NUM=${pinouts.PWDN_GPIO_NUM} ; Set the PWDN pin
|
|
||||||
-DRESET_GPIO_NUM=${pinouts.RESET_GPIO_NUM} ; Set the RESET pin
|
|
||||||
-DXCLK_GPIO_NUM=${pinouts.XCLK_GPIO_NUM} ; Set the XCLK pin
|
|
||||||
-DSIOD_GPIO_NUM=${pinouts.SIOD_GPIO_NUM} ; Set the SIOD pin
|
|
||||||
-DSIOC_GPIO_NUM=${pinouts.SIOC_GPIO_NUM} ; Set the SIOC pin
|
|
||||||
-DY9_GPIO_NUM=${pinouts.Y9_GPIO_NUM} ; Set the Y9 pin
|
|
||||||
-DY8_GPIO_NUM=${pinouts.Y8_GPIO_NUM} ; Set the Y8 pin
|
|
||||||
-DY7_GPIO_NUM=${pinouts.Y7_GPIO_NUM} ; Set the Y7 pin
|
|
||||||
-DY6_GPIO_NUM=${pinouts.Y6_GPIO_NUM} ; Set the Y6 pin
|
|
||||||
-DY5_GPIO_NUM=${pinouts.Y5_GPIO_NUM} ; Set the Y5 pin
|
|
||||||
-DY4_GPIO_NUM=${pinouts.Y4_GPIO_NUM} ; Set the Y4 pin
|
|
||||||
-DY3_GPIO_NUM=${pinouts.Y3_GPIO_NUM} ; Set the Y3 pin
|
|
||||||
-DY2_GPIO_NUM=${pinouts.Y2_GPIO_NUM} ; Set the Y2 pin
|
|
||||||
-DVSYNC_GPIO_NUM=${pinouts.VSYNC_GPIO_NUM} ; Set the VSYNC pin
|
|
||||||
-DHREF_GPIO_NUM=${pinouts.HREF_GPIO_NUM} ; Set the HREF pin
|
|
||||||
-DPCLK_GPIO_NUM=${pinouts.PCLK_GPIO_NUM} ; Set the PCLK pin
|
|
||||||
|
|
||||||
|
|
||||||
build_unflags = -Os
|
build_unflags = -Os
|
||||||
board_build.partitions = min_spiffs.csv
|
; board_build.partitions = min_spiffs.csv
|
||||||
|
board_build.partitions = huge_app.csv
|
||||||
lib_ldf_mode = deep+
|
lib_ldf_mode = deep+
|
||||||
upload_speed = 921600
|
upload_speed = 921600
|
||||||
release_version = 0.0.1 ; increase this value every release build
|
release_version = 0.0.1 ; increase this value every release build
|
||||||
@ -121,6 +125,25 @@ build_flags =
|
|||||||
${common.build_flags}
|
${common.build_flags}
|
||||||
-DCORE_DEBUG_LEVEL=4
|
-DCORE_DEBUG_LEVEL=4
|
||||||
-DVERSION=0
|
-DVERSION=0
|
||||||
|
|
||||||
|
; CAMERA PINOUT DEFINITIONS
|
||||||
|
-DPWDN_GPIO_NUM=${pinoutsESPCAM.PWDN_GPIO_NUM} ; Set the PWDN pin
|
||||||
|
-DRESET_GPIO_NUM=${pinoutsESPCAM.RESET_GPIO_NUM} ; Set the RESET pin
|
||||||
|
-DXCLK_GPIO_NUM=${pinoutsESPCAM.XCLK_GPIO_NUM} ; Set the XCLK pin
|
||||||
|
-DSIOD_GPIO_NUM=${pinoutsESPCAM.SIOD_GPIO_NUM} ; Set the SIOD pin
|
||||||
|
-DSIOC_GPIO_NUM=${pinoutsESPCAM.SIOC_GPIO_NUM} ; Set the SIOC pin
|
||||||
|
-DY9_GPIO_NUM=${pinoutsESPCAM.Y9_GPIO_NUM} ; Set the Y9 pin
|
||||||
|
-DY8_GPIO_NUM=${pinoutsESPCAM.Y8_GPIO_NUM} ; Set the Y8 pin
|
||||||
|
-DY7_GPIO_NUM=${pinoutsESPCAM.Y7_GPIO_NUM} ; Set the Y7 pin
|
||||||
|
-DY6_GPIO_NUM=${pinoutsESPCAM.Y6_GPIO_NUM} ; Set the Y6 pin
|
||||||
|
-DY5_GPIO_NUM=${pinoutsESPCAM.Y5_GPIO_NUM} ; Set the Y5 pin
|
||||||
|
-DY4_GPIO_NUM=${pinoutsESPCAM.Y4_GPIO_NUM} ; Set the Y4 pin
|
||||||
|
-DY3_GPIO_NUM=${pinoutsESPCAM.Y3_GPIO_NUM} ; Set the Y3 pin
|
||||||
|
-DY2_GPIO_NUM=${pinoutsESPCAM.Y2_GPIO_NUM} ; Set the Y2 pin
|
||||||
|
-DVSYNC_GPIO_NUM=${pinoutsESPCAM.VSYNC_GPIO_NUM} ; Set the VSYNC pin
|
||||||
|
-DHREF_GPIO_NUM=${pinoutsESPCAM.HREF_GPIO_NUM} ; Set the HREF pin
|
||||||
|
-DPCLK_GPIO_NUM=${pinoutsESPCAM.PCLK_GPIO_NUM} ; Set the PCLK pin
|
||||||
|
|
||||||
build_unflags = ${common.build_unflags}
|
build_unflags = ${common.build_unflags}
|
||||||
board_build.partitions = ${common.board_build.partitions}
|
board_build.partitions = ${common.board_build.partitions}
|
||||||
lib_ldf_mode = ${common.lib_ldf_mode}
|
lib_ldf_mode = ${common.lib_ldf_mode}
|
||||||
@ -137,6 +160,7 @@ monitor_rts = ${common.monitor_rts}
|
|||||||
monitor_dtr = ${common.monitor_dtr}
|
monitor_dtr = ${common.monitor_dtr}
|
||||||
build_flags =
|
build_flags =
|
||||||
${common.build_flags}
|
${common.build_flags}
|
||||||
|
${debug.build_flags}
|
||||||
-DCORE_DEBUG_LEVEL=1
|
-DCORE_DEBUG_LEVEL=1
|
||||||
-DVERSION=${common.release_version}
|
-DVERSION=${common.release_version}
|
||||||
build_unflags = ${common.build_unflags}
|
build_unflags = ${common.build_unflags}
|
||||||
@ -152,6 +176,7 @@ framework = ${common.framework}
|
|||||||
board = ${common.board}
|
board = ${common.board}
|
||||||
build_flags =
|
build_flags =
|
||||||
${common.build_flags}
|
${common.build_flags}
|
||||||
|
${debug.build_flags}
|
||||||
-DCORE_DEBUG_LEVEL=1
|
-DCORE_DEBUG_LEVEL=1
|
||||||
-DDEBUG_ESP_OTA
|
-DDEBUG_ESP_OTA
|
||||||
-DVERSION=${common.release_version}
|
-DVERSION=${common.release_version}
|
||||||
@ -169,3 +194,41 @@ upload_protocol = espota
|
|||||||
upload_flags =
|
upload_flags =
|
||||||
--port=3232
|
--port=3232
|
||||||
--auth=12345678
|
--auth=12345678
|
||||||
|
|
||||||
|
[env:wrover]
|
||||||
|
platform = ${common.platform}
|
||||||
|
board = esp-wrover-kit
|
||||||
|
framework = ${common.framework}
|
||||||
|
monitor_speed = ${common.monitor_speed}
|
||||||
|
;monitor_rts = ${common.monitor_rts}
|
||||||
|
;monitor_dtr = ${common.monitor_dtr}
|
||||||
|
build_flags =
|
||||||
|
${common.build_flags}
|
||||||
|
-DCORE_DEBUG_LEVEL=4
|
||||||
|
-DVERSION=${common.release_version}
|
||||||
|
|
||||||
|
; CAMERA PINOUT DEFINITIONS
|
||||||
|
-DPWDN_GPIO_NUM=${pinoutsESPWROVER.PWDN_GPIO_NUM} ; Set the PWDN pin
|
||||||
|
-DRESET_GPIO_NUM=${pinoutsESPWROVER.RESET_GPIO_NUM} ; Set the RESET pin
|
||||||
|
-DXCLK_GPIO_NUM=${pinoutsESPWROVER.XCLK_GPIO_NUM} ; Set the XCLK pin
|
||||||
|
-DSIOD_GPIO_NUM=${pinoutsESPWROVER.SIOD_GPIO_NUM} ; Set the SIOD pin
|
||||||
|
-DSIOC_GPIO_NUM=${pinoutsESPWROVER.SIOC_GPIO_NUM} ; Set the SIOC pin
|
||||||
|
-DY9_GPIO_NUM=${pinoutsESPWROVER.Y9_GPIO_NUM} ; Set the Y9 pin
|
||||||
|
-DY8_GPIO_NUM=${pinoutsESPWROVER.Y8_GPIO_NUM} ; Set the Y8 pin
|
||||||
|
-DY7_GPIO_NUM=${pinoutsESPWROVER.Y7_GPIO_NUM} ; Set the Y7 pin
|
||||||
|
-DY6_GPIO_NUM=${pinoutsESPWROVER.Y6_GPIO_NUM} ; Set the Y6 pin
|
||||||
|
-DY5_GPIO_NUM=${pinoutsESPWROVER.Y5_GPIO_NUM} ; Set the Y5 pin
|
||||||
|
-DY4_GPIO_NUM=${pinoutsESPWROVER.Y4_GPIO_NUM} ; Set the Y4 pin
|
||||||
|
-DY3_GPIO_NUM=${pinoutsESPWROVER.Y3_GPIO_NUM} ; Set the Y3 pin
|
||||||
|
-DY2_GPIO_NUM=${pinoutsESPWROVER.Y2_GPIO_NUM} ; Set the Y2 pin
|
||||||
|
-DVSYNC_GPIO_NUM=${pinoutsESPWROVER.VSYNC_GPIO_NUM} ; Set the VSYNC pin
|
||||||
|
-DHREF_GPIO_NUM=${pinoutsESPWROVER.HREF_GPIO_NUM} ; Set the HREF pin
|
||||||
|
-DPCLK_GPIO_NUM=${pinoutsESPWROVER.PCLK_GPIO_NUM} ; Set the PCLK pin
|
||||||
|
|
||||||
|
build_unflags = ${common.build_unflags}
|
||||||
|
board_build.partitions = ${common.board_build.partitions}
|
||||||
|
lib_ldf_mode = ${common.lib_ldf_mode}
|
||||||
|
upload_speed = ${common.upload_speed}
|
||||||
|
lib_deps =
|
||||||
|
${common.lib_deps}
|
||||||
|
upload_port = COM6
|
||||||
Loading…
Reference in New Issue
Block a user