mirror of
https://github.com/joshr120/PD-Stepper.git
synced 2025-11-04 14:49:56 +08:00
Fix for for type in README.md
This commit is contained in:
parent
2d55fd9202
commit
12d640ae89
@ -111,4 +111,4 @@ When programming the board it is likely your computer will only be able to provi
|
|||||||
NOTE: You must use a USB PD power brick/power bank which can provide the required voltage and current along with a suitable USB-C cable. QC (Quick Charge) is not currently supported.
|
NOTE: You must use a USB PD power brick/power bank which can provide the required voltage and current along with a suitable USB-C cable. QC (Quick Charge) is not currently supported.
|
||||||
|
|
||||||
## Setting the driver Current ##
|
## Setting the driver Current ##
|
||||||
The motor current can be set either in hardware with the onboard potentiometer or over the TMC2209 serial interface (see the [TMC2209 library](https://github.com/janelia-arduino/TMC2209) for for info on serial comms)
|
The motor current can be set either in hardware with the onboard potentiometer or over the TMC2209 serial interface (see the [TMC2209 library](https://github.com/janelia-arduino/TMC2209) for more info on serial comms)
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user