Update README.md

This commit is contained in:
joshr120 2024-11-04 22:17:04 +13:00 committed by GitHub
parent bc47fb5ed1
commit 35ac67fead
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194

View File

@ -5,7 +5,9 @@ If you just received your PD Stepper this will show you how to spin a motor and
Timestamp 1:50 of [this video](https://youtu.be/qECEGUZE04s?t=110) shows how to setup a Nema 17 with your kit. There are 2 looms provided in the kit for different motors, try one and if at the next step your motor stutters/doesnt spin, power off the board and try the other one.
NOTE: Do not disconnect/connect the motor while the board is powered.
NOTES:
1. Do not disconnect/connect the motor while the board is powered.
2. If you are not using the heatspreader/spacer (partial kit) ensure the board is not resting directly on the motor as this could short out the traces on the underside of the PCB. Use washers or an insualting layer.
## Running the Webserver ##
**1.** Connect the PD Stepper to your PD power supply.