Commit Graph

16 Commits

Author SHA1 Message Date
iabdalkader
6f7de049b1 Fix components values 2014-08-10 14:40:18 +02:00
iabdalkader
45c4b7f512 Add REV5.1 2014-07-15 08:53:59 +02:00
iabdalkader
6daea3bede Add REV5 2014-06-14 18:39:49 +02:00
shimniok@gmail.com
821155bf1a Readying for production run, fixed OSHPark DRC errors 2014-05-19 08:32:54 -06:00
iabdalkader
beb380a160 Add rev4-a 2014-05-07 01:41:35 +02:00
iabdalkader
35c817f040 Update REV4
* Replace regulator with ADP121xx
* Use the new crystal
* Fix USB connector
2014-04-18 01:13:29 +02:00
iabdalkader
c8e539a184 Update REV4
* Make more room for mounting holes, and dbg header
2014-04-13 20:35:17 +02:00
iabdalkader
c1588d7175 Update HW REV4
* Use dual LDO
* Add I2C EEPROM
* Update RESET switch
* Add bulk cap to STM VCC
* Add diode on debug VCC
* Add bead for sensor filter
* Use separate USART
2014-03-13 20:22:35 +02:00
iabdalkader
893921390a Add debugger adaptor
* Add 2mm to 2.54mm debugger adaptor
2014-02-09 18:02:52 +02:00
iabdalkader
d4c7fed1d9 Update REV4
* Use a different I2C multiplexed with USART
2014-02-09 18:00:05 +02:00
iabdalkader
0339e80c96 Update REV4
* Add regulator test points
* Remove 10mil via
2014-01-29 21:22:14 +02:00
iabdalkader
48826fb1f6 Add new HW revision
* Remove power switch and its decoupling cap
* Resize the mounting holes to 2mm
* Connect the switch to NRST instead of BOOT0
* Change RGB LED footprint to PLCC-6
* Change switch footprint
* Add extra pads to usb connector
* Remove crystal and load caps, use ceramic resonator
2014-01-26 13:41:36 +02:00
iabdalkader
d45395eb38 Add 3rd hardware revision
* Replace single resistors with resistor networks.
* Add pull-ups to the uSD SPI signals and unused pins.
* Add a 2mm pitch debugging header.
* Breakout I2C3, SPI3 and USART3 using the main header.
* Fix silk screen component names.
* Connect the sensor's PWDWN and RESET to GPIO.
* Add a MOSFET load switch to enable/disable power to the uSD.
* Add a bulk cap to STM micro.
* Add a switch to enter the DFU mode.
2014-01-02 11:17:01 +02:00
iabdalkader
9ef9899041 Add test points to breakout SPI3 2013-12-13 02:56:42 +02:00
iabdalkader
0d8c75e0b4 Added the new hardware revision
Added missing DSP library
Fixed SysTick timer IRQ priority
userspace fixes
2013-12-06 03:40:57 +02:00
iabdalkader
b439bdae91 Initial commit 2013-11-13 12:24:56 +02:00