# Python (and MicroPython) APDS-9960 Library Python library for the APDS-9960 gesture sensor developed while I was looking to get the APDS-9960 to work with a _Raspberry Pi_ to build a user interface feeling like in _Minority Report_. This library is a port of the [APDS-9960 Raspberry Pi Library](https://bitbucket.org/justin_woodman/apds-9960-raspberry-pi-library) of [Justin Woodman](https://justinwoodman.wordpress.com/2014/11/15/using-the-apds-9960-rgb-proximity-and-gesture-sensor-with-the-raspberry-pi-2/). Sadly his library is coded in C++ and seems not to be maintained any more. This library has been tested with [SparkFun RGB and Gesture Sensor - APDS-9960](https://www.sparkfun.com/products/12787) but should work with any other APDS-9960 based I²C device, too. ## Installation This library is available from [PyPi](https://pypi.org/project/apds9960/). You may want to setup a `virtualenv` before installing the library using: ``` pip install apds9960 ``` ## Features of the APDS-9960 - operational voltage: 3.3V - ambient light & RGB color sensing - proximity sensing - gesture detection - operating range: 10 - 20cm - I²C interface (hard wired I²C address: 0x39) ## Documentation & Examples - [RPi](RPi.md) - connect and configure the APDS-9960 on Raspberry Pi - Example scripts: - simple ambient light level demo: [rpi](rpi/test_ambient.py), [micropython](micropython/test_ambient.py) - simple gesture detection demo: [rpi](rpi/test_gesture.py), [micropython](micropython/test_gesture.py) - simple proximity level demo: [rpi](rpi/test_prox.py), [micropython](micropython/test_prox.py)