>VALUE <b>SUPPLY SYMBOL</b> >NAME >VALUE >Name >Value >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF >NAME >VALUE >Name >Value <b>RESISTOR</b><p> chip >NAME >VALUE >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE 1/6W Thru-hole Resistor - *UNPROVEN* >NAME >VALUE >NAME >VALUE 1/4W Resistor, 0.4" wide<p> Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1/2W Resistor, 0.5" wide<p> Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1W Resistor, 0.6" wide<p> Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 2W Resistor, 0.8" wide<p> Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value >Name >Value >NAME >VALUE >Name >Value >Name >Value <b>CAPACITOR</b><p> chip >NAME >VALUE 1007 (2518 metric) package >NAME >VALUE >Name >Value >NAME >VALUE 1.3x1.3mm 1.7mm between. Fits Sumida CDRH2D09, CDRH2D18 inductor >NAME >VALUE <b>CAPACITOR</b><p> chip >NAME >VALUE >NAME >VALUE >NAME >VALUE <b>TO 92</b> >NAME >VALUE >NAME >VALUE Small solder jumper with big paste layer so it will short during reflow. >NAME >VALUE Solder jumper, small, shorted with trace. No paste layer. Trace is cuttable. >NAME >VALUE >NAME >VALUE Small solder jumper with no paste layer so it will open after reflow. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE D S G >NAME <b>Capacitor</b> Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. <b>Resistor</b> Basic schematic elements and footprints for 0603, 1206, and PTH resistors. <b>Inductors</b> Basic Inductor/Choke - 0603 and 1206. Footprints are not proven and vary greatly between part numbers. <b>Solder Jumper</b> Standard SMD solder jumper. Used to automate production. Two varients : Normally Open and Normally Closed are the same, but have different paste layers. NC will have a large amount of paste and should jumper during reflow. <b>Frames for Sheet and Layout</b> Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: Document Number: >DRAWING_NAME <b>FRAME</b><p> DIN A3, landscape with extra doc field <b>Supply Symbols</b><p> GND, VCC, 0V, +5V, -5V, etc.<p> Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals.<p> The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> <author>Created by librarian@cadsoft.de</author> >VALUE <b>SUPPLY SYMBOL</b> JD-T1800 128x160 18-bit color 1.8" TFT >VALUE <b>SUPPLY SYMBOL</b> >VALUE <b>SUPPLY SYMBOL</b> >NAME >VALUE Copyright (c) 2013 Ibrahim Abd Elkader <i.abdalkader@gmail.com> This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/ 2