# CAD Most CAD work is done in Fusion 360 and versioned outside of this git repo. # Assemblies ## SmartKnob View - [Complete SmartKnob View assembly](https://a360.co/3BzkU0n) ## Handheld - [Case bottom](https://a360.co/3LM82se) For breadboard with power rails removed. - [Motor adapter](https://a360.co/3LO03eC) Connects motor to Adafruit TLV493d adapter board, and screws into Case - [Thumbwheel](https://a360.co/3H3jSee) Test thumbwheel for motor rotor, for turning from the side # Motors Note that all measurements were done by hand and will be approximate. Chamfers & fillets are approximated. ## 32mm - [Motor model](https://a360.co/3H8LUFi) ## 17mm - [Motor model](https://a360.co/3sYa93Y) - [Spacer](https://a360.co/3H3xh5M) (screw at the bottom is replaced with a longer M1.4 screw with this spacer inserted; diametric magnet is glued to screw) - [Dummy test jig](https://a360.co/3sPQgvB) ## 15mm - [Motor model](https://a360.co/34N1nOa) - [Magnet spacer](https://a360.co/3532Tvb) - [Magnet gluing jig](https://a360.co/3I1xbx6) - [Adapter](https://a360.co/35gC86B) - mount motor to Adafruit TLV493d adapter board