smartknob/electronics/view_base
Scott Bezek 340eed936d
Use 2512 SMD resistors in place of strain gauges (#104)
As suggested in https://github.com/scottbez1/smartknob/issues/24#issuecomment-1073540944 and inspired by https://github.com/IvDm/Z-probe-on-smd-resistors-2512, this adds 4x 330 ohm 2512 SMD resistors to the back to act as strain gauges, rather than requiring discrete strain gauges to be glued and wired up.

Also applies a few changes I accidentally had pending locally:
- Custom footprints for the 2 3.3v LDO options to clarify the pinout options
![image](https://user-images.githubusercontent.com/414890/204078474-8327e8ed-78b5-4fe3-a91d-9c20fe54fcbc.png)
- some BOM note updates

Fixes #24
Closes #33
2022-11-27 10:07:35 -08:00
..
lib Add alignment holes, update board outline - shorter slots 2022-03-14 17:28:30 -07:00
fp-lib-table Generate merged BOM (#15) 2022-03-13 17:04:22 -07:00
sym-lib-table View: rename base pcb to view_base 2022-02-13 09:38:23 -08:00
view_base-cache.lib Fix HX711 analog supply, fix 3.3v regulator 2022-03-10 19:18:51 -08:00
view_base.kibot.yml Migrate to KiCad 6 (#96) 2022-10-02 21:40:10 -07:00
view_base.kicad_pcb Use 2512 SMD resistors in place of strain gauges (#104) 2022-11-27 10:07:35 -08:00
view_base.kicad_pro Adding second footprint for 3V3 voltage regulator (#98) 2022-10-10 20:26:51 -07:00
view_base.kicad_sch Use 2512 SMD resistors in place of strain gauges (#104) 2022-11-27 10:07:35 -08:00