mirror of
https://github.com/EyeTrackVR/EyeTrackVR-Docs.git
synced 2025-11-04 14:49:44 +08:00
fix weird order
This commit is contained in:
parent
56731f9d5a
commit
9192b8c7a1
@ -141,41 +141,6 @@ Negative: This marks the negative side of the LED.
|
||||
|
||||
Positive: This marks the positive side of the LED.
|
||||
|
||||
## Solder resistors on PCB V3.
|
||||
|
||||
You only need 1 PCB to have resistors per eye.
|
||||
|
||||
Tin the resistor pads. Note: in this example, I use too much solder, it should only be enough to lightly cover the pad.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/gb4etdB.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
|
||||
Next, grab a resistor and hold it on the pads.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/ev5QFch.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
While holding the resistor add solder to your soldering iron and apply it to the resistor.
|
||||
|
||||
I like to do this by having a piece of my solder stick up in the air and then put it on my iron that way.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/8jCQOHw.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Flip the PCB and solder the other end.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/CHUb7Iv.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Now repeat for the other one.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/jZYAm5O.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
|
||||
## Solder LEDs on PCB V3.
|
||||
Tin the LED pads.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/pjvLHJL.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Orientate the LED and hold in place.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/RbHZQhl.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Solder one end.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/VyClWvp.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Flip areound and solder the other end.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/tFCQTqE.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
|
||||
## Solder resistors on PCB V2.
|
||||
@ -218,6 +183,45 @@ Basic full wiring diagram of IR PCBs V2
|
||||
|
||||
The PCB that receives the 5V power is the one with the resistor. The second one, which gets its power from the ground pin of the first, does not have a resistor on it and its power input pin is the AR pin (After-Resistor). The 2nd PCBs ground pin goes to the ground of the system, in the diagram it is the ESPs ground pin.
|
||||
|
||||
## Solder resistors on PCB V3.
|
||||
|
||||
You only need 1 PCB to have resistors per eye.
|
||||
|
||||
Tin the resistor pads. Note: in this example, I use too much solder, it should only be enough to lightly cover the pad.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/gb4etdB.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
|
||||
Next, grab a resistor and hold it on the pads.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/ev5QFch.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
While holding the resistor add solder to your soldering iron and apply it to the resistor.
|
||||
|
||||
I like to do this by having a piece of my solder stick up in the air and then put it on my iron that way.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/8jCQOHw.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Flip the PCB and solder the other end.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/CHUb7Iv.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Now repeat for the other one.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/jZYAm5O.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
|
||||
## Solder LEDs on PCB V3.
|
||||
Tin the LED pads.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/pjvLHJL.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Orientate the LED and hold in place.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/RbHZQhl.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Solder one end.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/VyClWvp.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
Flip areound and solder the other end.
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/tFCQTqE.jpg" max-width="400" caption="" alt="img" %}
|
||||
|
||||
|
||||
|
||||
|
||||
## Wire up the PCBs V3.
|
||||
|
||||
{% include custom/images/image_2.html url="https://i.imgur.com/AxgHiAU.png" max-width="500" caption="" alt="drawing" %}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user